Weather knowledge for the working farmFind current NWS forecasts & warnings ↗
AgWeather & Alerts HubA practical farm weather directory

Swine heat management depends on ventilation, water, stocking, animal size and system design. A fan inspection must include inlets and controls.

What changes the decision

Observe pigs and obtain herd-specific veterinary or engineering guidance for action levels.

Illustrative farm scenario

Work through the situation

A barn fan runs at full command while blocked inlets restrict air movement. Increasing the thermostat setting cannot open the blocked inlet. Verify conditions where pigs are housed and correct the system problem.

Put the information to work

  1. Check drinking-water delivery and access.
  2. Inspect the full airflow path with safe isolation.
  3. Test alarms and backup-power arrangements.

Understand the weather behind it

Heat exposure changes with humidity, sun, airflow, workload and the ability to recover. A thermometer outside an office cannot describe every pen, hutch or field task. Use indices suited to their intended subject and direct observations in occupied areas. Ventilation, water delivery and power reliability should be checked as connected systems. Species-specific care and occupational heat plans supply the action levels for the people and animals involved.

Terms used in this decision

Solar load
Heat received from sunlight and surrounding surfaces.
Recovery
Opportunity to shed accumulated heat between exposures.

A field record for this job

Use one record for the specific location and work period. Keep the original source or measurement available so another person can understand why the decision was made.

Record fields for Swine Heat and Ventilation Checklist
RecordYour notes
Occupied location, time and exposure conditions________________________________
Water delivery, airflow and equipment operation________________________________
Observed response and the action taken________________________________
Next check and responsible person________________________________

Before the plan is committed

  • What do the occupied areas actually feel and measure like?
  • Can water and cooling meet peak demand?
  • Who responds if distress or an equipment failure occurs?

Sources and local help

Use the source appropriate to the actual crop, animal, machine and location. Equipment manuals, current product instructions and advice from qualified local specialists supply details that a general weather guide cannot determine.

Find local forecasts, weather networks and Extension offices · Find television and radio weather